SOLAX SMART EV CHARGER is an intelligent charging station for electric vehicles from the leading manufacturer of hybrid inverters. It enables dynamic charging, limitation of electricity consumption from the grid and maximum use of your PV power plant. Can be installed on existing inverters, but works best with SOLAX inverters, with which it is fully synchronized and compact and allows you to take full advantage of its features.
Plug or Type2 charging cable optional (Vers. PXH)
built-in 30mA RCD type A and 6mA DC protection
Integrated PEN protection without the use of a ground rod
encrypted communication based on TSL Smart
dynamic loading control
Wide operating temperature range - suitable for indoor and outdoor installation
Control of energy flows thanks to the SolaX system - use of 100% of the energy obtained from your PV system
Several charging modes - green, fast, timer, smart
Integrated RFID function
easy installation
Remote monitoring and monitoring on websites or via app
Smart and efficient charging is now possible quickly and easily with the EV charger from the HCA series from Goodwe. The direct connection to the existing Goodwe system takes place via WiFi. In this way, the PV surplus from your system can be used in the best possible way to charge the vehicle. You can keep an overview of all charging processes in the Goodwe SEMS portal and via the app. The integrated DC residual current circuit breaker and emergency stop ensure safety and cost-saving installation. Compatible with all vehicles - get started.
Product advantages:
• Optimized for direct connection to Goodwe inverters
• Charge with excess PV
• 6mA DC residual current circuit breaker on board
• Type 2 surge protection integrated
• Online monitoring via WiFi + app
Product features:
• Charging power: 11 kW
• Power supply: 400 V, 16A, 3-phase
• Communication: Wifi + App
• Protection class: IP66
• Cooling: Passive
Smart and efficient charging is now possible quickly and easily with the EV charger from the HCA series from Goodwe. The direct connection to the existing Goodwe system takes place via WiFi. In this way, the PV surplus from your system can be used in the best possible way to charge the vehicle. You can keep an overview of all charging processes in the Goodwe SEMS portal and via the app. The integrated DC residual current circuit breaker and emergency stop ensure safety and cost-saving installation. Compatible with all vehicles - get started.
Product advantages:
• Optimized for direct connection to Goodwe inverters
• Charge with excess PV
• 6mA DC residual current circuit breaker on board
• Type 2 surge protection integrated
• Online monitoring via WiFi + app
Product features:
• Charging power: 22 kW
• Mains connection: 400V, 32A, 3-phase
• Communication: Wifi + App
• Protection class: IP66
• Cooling: Passive
With the SMA EV Charger, solar system operators can refuel their electric vehicles intelligently and sustainably. Regardless of whether it is a new or existing system, the SMA EV Charger can be used flexibly and is compatible with all common electric vehicles thanks to the permanently connected Type 2 charging cable. In combination with the Sunny Home Manager 2.0, users prefer to charge their electric vehicle with solar power and particularly quickly when it matters most.
It is operated simply using a rotary switch on the device or via the SMA Energy app. The boost function enables charging almost twice as fast compared to conventional charging stations. Even small solar outputs can be maximized by automatically switching between single- and three-phase charging mode. The intelligent system always takes all consumers into account and avoids overloading the house connection.
The three-phase AC charging station from SMA has a charging capacity of 1.3 to 22 kW, blackout protection, boost function, automatic phase switching, type 2 plug, including 5m charging cable and integrated 6mA DC residual current protection. p>
SOLAX SMART EV CHARGER is an intelligent charging station for electric vehicles from the leading manufacturer of hybrid inverters. It enables dynamic charging, limitation of power consumption from the grid and maximum use of your PV power plant. Can be installed on existing inverters, but works best with SOLAX inverters, with which it is fully synchronized and compact and allows you to take full advantage of its features.
Plug or Type2 charging cable optional (Vers. PXH)
built-in 30mA RCD type A and 6mA DC protection
Integrated PEN protection without the use of a ground rod
encrypted communication based on TSL Smart
dynamic loading control
Wide operating temperature range - suitable for indoor and outdoor installation
Control of energy flows thanks to the SolaX system - use of 100% of the energy obtained from your PV system
Several charging modes - green, fast, timer, smart
Integrated RFID function
easy installation
Remote monitoring and monitoring on websites or via app
With the SMA EV Charger, solar system operators can refuel their electric vehicles intelligently and sustainably. Regardless of whether it is a new or existing system, the SMA EV Charger can be used flexibly and is compatible with all common electric vehicles thanks to the permanently connected Type 2 charging cable. In combination with the Sunny Home Manager 2.0, users prefer to charge their electric vehicle with solar power and particularly quickly when it matters most.
It is operated simply using a rotary switch on the device or via the SMA Energy app. The boost function enables charging almost twice as fast compared to conventional charging stations. Even small solar outputs can be maximized by automatically switching between single- and three-phase charging mode. The intelligent system always takes all consumers into account and avoids overloading the house connection.
The three-phase AC charging station from SMA has a charging capacity of 1.3 to 22 kW, blackout protection, boost function, automatic phase switching, type 2 plug, including 5m charging cable and integrated 6mA DC residual current protection. p>
SOLAX SMART EV CHARGER is an intelligent charging station for electric vehicles from the leading manufacturer of hybrid inverters. It enables dynamic charging, limitation of electricity consumption from the grid and maximum use of your PV power plant. Can be installed on existing inverters, but works best with SOLAX inverters, with which it is fully synchronized and compact and allows you to take full advantage of its features.
Plug or Type2 charging cable optional (Vers. PXH)
built-in 30mA RCD type A and 6mA DC protection
Integrated PEN protection without the use of a ground rod
encrypted communication based on TSL Smart
dynamic loading control
Wide operating temperature range - suitable for indoor and outdoor installation
Control of energy flows thanks to the SolaX system - use of 100% of the energy obtained from your PV system
Several charging modes - green, fast, timer, smart
Integrated RFID function
easy installation
Remote monitoring and monitoring on websites or via app
With the SMA EV Charger, solar system operators can refuel their electric vehicles intelligently and sustainably. Regardless of whether it is a new or existing system, the SMA EV Charger can be used flexibly and is compatible with all common electric vehicles thanks to the permanently connected Type 2 charging cable. In combination with the Sunny Home Manager 2.0, users prefer to charge their electric vehicle with solar power and particularly quickly when it matters most.
It is operated simply using a rotary switch on the device or via the SMA Energy app. The boost function enables charging almost twice as fast compared to conventional charging stations. Even small solar outputs can be maximized by automatically switching between single- and three-phase charging mode. The intelligent system always takes all consumers into account and avoids overloading the house connection.
The three-phase AC charging station from SMA has a charging power of 1.3 to 22 kW, blackout protection, boost function, automatic phase switching, type 2 plug, including 5m charging cable and an integrated 6mA DC Residual current protection.
With the SMA EV Charger, solar system operators can refuel their electric vehicles intelligently and sustainably. Regardless of whether it is a new or existing system, the SMA EV Charger can be used flexibly and is compatible with all common electric vehicles thanks to the permanently connected Type 2 charging cable. In combination with the Sunny Home Manager 2.0, users prefer to charge their electric vehicle with solar power and particularly quickly when it matters most.
It is operated simply using a rotary switch on the device or via the SMA Energy app. The boost function enables charging almost twice as fast compared to conventional charging stations. Even small solar outputs can be maximized by automatically switching between single- and three-phase charging mode. The intelligent system always takes all consumers into account and avoids overloading the house connection.
The three-phase AC charging station from SMA has a charging power of 1.3 to 22 kW, blackout protection, boost function, automatic phase switching, type 2 plug, including 5m charging cable and an integrated 6mA DC Residual current protection.
With the Solar.wattpilot app, the charging solution can be easily commissioned and operated. It also offers the user a visually appealing overview of the status of the loads. The app is the only user interface that is required to operate all functions easily and clearly. A charging solution must be able to follow the sun: If there is a lot of solar energy available, a lot of refueling is done; if there is little available, less is refueled.
The Fronius Wattpilot can optimally utilize the PV surplus and regulates it in 1 amp steps up to the maximum charging power. The Fronius Wattpilot can switch between single-phase and three-phase charging. This means that the entire PV surplus from 1.38 kW to 22 kW is used.
The charging takes place in amp steps, the one/three phase switching is fully automatic. The Wattpilot also has two different charging modes, Eco and Next Trip Mode. Depending on the situation, the electric vehicle is charged either very economically or specifically with the desired amount of energy for the next planned route. Eco mode is ideal for PV system owners because it combines the PV excess charging. With Next Trip Mode you can load the energy into your car for a specific route.
With the Solar.wattpilot app, the charging solution can be easily commissioned and operated. It also offers the user a visually appealing overview of the status of the loads. The app is the only user interface that is required to operate all functions easily and clearly. A charging solution must be able to follow the sun: If there is a lot of solar energy available, a lot of refueling is done; if there is little available, less is refueled.
The Fronius Wattpilot can optimally utilize the PV surplus and regulates it in 1 amp steps up to the maximum charging power. The Fronius Wattpilot can switch between single-phase and three-phase charging. This means that the entire PV surplus from 1.38 kW to 22 kW is used.
The charging takes place in amp steps, the one/three phase switching is fully automatic. The Wattpilot also has two different charging modes, Eco and Next Trip Mode. Depending on the situation, the electric vehicle is charged either very economically or specifically with the desired amount of energy for the next planned route. Eco mode is ideal for PV system owners because it combines the PV excess charging. With Next Trip Mode you can load the energy into your car for a specific route.
TAC-W22-T-R-C-0 Terra AC wall charging station, charging socket type 2, RFID reader, 4G, charging power max. 22 kW (limitable to 11 kW), 3-phase with 32A
TAC-W22-G5-R-C-0 Terra AC wall charging station, 5m type 2 charging cable, RFID reader, 4G, charging power max. 22 kW (limitable to 11 kW), 3-phase with 32A
TAC-W22-T-R-0 Terra AC wall charging station, charging socket type 2, RFID reader, charging power charging power max. 22 kW (limitable to 11 kW), 3-phase with 32A
Legrand Green'up charging station 3.7/4.6 kW, charging socket type 2 with touch protection mode 3 and Green'up protective contact socket mode 2, for charging electric vehicles in accordance with IEC 61851-1. The reinforced Green'up protective contact socket enables a shortened charging time thanks to a maximum charging current of up to 16 A. Charging socket type 2, 1-phase charging 230 V AC, adjustable charging power: 3.7 or 4.6 kW / charging current 16 or 20 A. Number of charging points: 2, protection class IP 55 - IK 10, material: steel, color: white/black, dimensions (HxWxD): 740 x 430 x 243 mm, for mounting directly on the wall with wall fastening order no. 059053 (necessary) or as a column with base order no. 059054 (Optional). Operation of the charging station using a function button for direct ON/OFF switching and charging or delayed switching on of the charging process for 3, 6 or 9 hours. Illuminated status display for easy identification of the operating status. Programmable daily charging/energy management and access locking via integrated Bluetooth and the EV-Charge app. Control function and remote configuration with smartphone or PC via IP (RJ45) or WiFi with communication set Order no. 059056 expandable, protocols: OCPP 1.6 and 2.0, Modbus RS485. RFID access control, identification and personalized data management with RFID card module Order no. 059059 expandable (requires communication set as base). Integrated DC residual current detection. Each charging station must be pre-protected in accordance with regulations with a residual current circuit breaker and circuit breaker in accordance with local connection conditions.
Legrand Green'up wall charging station 22 kW, charging socket type 2 with contact protection, for charging electric vehicles according to IEC 61851-1 Mode 3. 3-phase charging 400 V AC, charging power adjustable: 11/15/18 or 22 kW / charging current 16/ 20/25 or 32 A. Number of charging points: 1, protection class IP 44 - IK 08, material: plastic, color: white/black, dimensions (HxWxD): 365 x 295 x 140 mm, for mounting directly on the wall or as a Stand column with base order no. 059052 (Optional). Operation of the charging station using a function button for direct ON/OFF switching and charging or delayed switching on of the charging process for 3, 6 or 9 hours. Illuminated status display for easy identification of the operating status. Programmable daily charging/energy management and access locking via integrated Bluetooth and the EV-Charge app. Control function and remote configuration with smartphone or PC via IP (RJ45) or WiFi with communication set Order no. 059056 expandable, protocols: OCPP 1.6 and 2.0, Modbus RS485. Integrated DC residual current detection. Each charging station must be pre-protected in accordance with regulations with a residual current circuit breaker and circuit breaker in accordance with local connection conditions.
€1,380.32*
This website uses cookies to ensure the best experience possible. More information...