Filter
–
Suitable for wall boxes with and without cables. Measuring adapter to test the type 2 charging stations standardized in Europe. Takes over communication with the charging station and simulates an electric vehicle. An installation tester or multimeter can be connected via a 4 mm banana socket. Testing with a VDE installation tester is possible (item no.: 05103468, ID no. 053953). LEDs show whether and how many phases are present. Testing of each individual phase using the built-in protective contact socket (one of the three phases can be switched). Connection option for installation tester or multimeter. Direct check of the phases via LED display. Built-in Schuko socket with phase switching. Input voltage: 230V / 400V (1 phase / 3 phase) Proximity Pilot (PP) simulation of the charging cable: NC / 13 A / 20 A / 32 A / 63 A. Control Pilot (CP), simulation of the vehicle state: A (not connected) / B (connected but not charging) / C ( charging without ventilation) / D (charging with ventilation). Error simulation CP error "E": Communication error / PE error (protective conductor interrupted). Ready bag included.
The PROTEC.class wallbox tester checks the most important functions of the charging station in no time. This tester simulates a vehicle that is ready to charge, checks the plug locking and also shows the applied phases via an LED display. Checking the functionality of TYP-2 charging stations/wallboxes, can be used on all common wallboxes with and without a permanently connected cable, power supply via TYP-2 socket, phase display via 3 LEDs (L1, L2, L3), simulation of vehicle states A, B & C