Replacement module for radio push-button detector TG558A, house alarm. Radio push-button detector insert of the push-button house alarm TG558A for replacing the electronics, signalling unit and battery while continuing to use the housing. Replacement cycle of the insert approx. 10 years.
Replacement module for radio push-button detector TG558B, alarm stop. Radio pushbutton detector insert of the pushbutton alarm stop TG558B for replacing the electronics, alarm unit and battery while continuing to use the housing. Replacement cycle of the insert approx. 10 years.
BEKA sensor head without base for smoke detectors. Replacement sensor head for the rotation change of the BEKA radio smoke detector RFM100D after 8 years, sensor head with detection unit and battery, radio control unit automatically recognises the new sensor head, in case of deviation from the previous sensor head type, this must be confirmed at the control unit, no new teach-in of the detector necessary.
BEKA radio push-button detector, house alarm, blue. Bidirectional radio push-button detector for integration into the fire detection system RFZxxxD is used for manual alarm triggering, this detector has a range indicator with optical display in teach-in mode. The push-button detector indicates its status via an LED and is reset by opening the flap. When the rotation change is indicated at the control panel after approx. 5 years, the detector unit can be replaced by means of the RFA200D push-button insert.
BEKA radio indoor siren, red with battery. Bidirectional battery-operated radio siren for integration into the fire detection system RFZxxxD for acoustic signalling with max. 100 dB in case of fire. Teach-in mode with range indication by means of acoustic signalling. 14 radio sirens can be integrated per RFZxxxD and assigned to corresponding areas.
BEKA backup battery for repeater RFR100D, 12 Volt - 7.2 Ah. Backup battery (emergency power accumulator) for radio repeater in the BEKA fire detection system according to DIN EN 54-25.
BEKA radio repeater for range extension. Bidirectional radio range repeater with emergency power bypass in case of power failure for integration into the fire detection system and for extending the radio ranges of BEKA radio components. Alarming of individual areas is possible. The repeater has 2 relay outputs for fire and fault. Up to 5 radio repeaters can be integrated per BEKA system. In mixed operation (radio and bus repeater in one BEKA system) up to 5 radio and 5 bus repeaters can be integrated. Teach-in mode with range indication by means of optical display. Note: The emergency power accumulator RFA400D is not included in the scope of delivery. Approval: DIN EN 54-18, DIN EN 54-25 Supply voltage: 230 V AC / 50 Hz Connection type: radio 868 MHz / 434 MHz Dimensions (WxHxD): 325 x 220 x 88 mm Colour: white
BEKA sensor head without base for dual detectors. Replacement sensor head for the rotation change of the BEKA radio dual detector RFM102D after 8 years, sensor head with detection unit and battery, radio control unit automatically recognises the new sensor head, in case of deviation from the previous sensor head type, this must be confirmed at the control unit, no new teach-in of the detector necessary.
BEKA sensor head without base for heat detectors. Replacement sensor head for the recommended rotation replacement of the BEKA radio heat detector RFM101D after 8 years, sensor head with detection unit and battery, radio control unit automatically recognises the new sensor head, in case of deviation from the previous sensor head type, this must be confirmed at the control unit, no new teach-in of the detector necessary.
BEKA radio dual detector with integrated siren, EN54, white. Bi-directional radio heat detector according to DIN EN 54-5/54-7 with integrated siren and threshold tracking, pollution level and battery capacity evaluation, EMC fault detection, serves for smoke detection, integration into the fire detection system RFZxxxD, as well as deactivation of smoke detection via the control panel settings as day-after function. Area or individual detector alarm by means of integrated signal transmitter possible via control unit menu. Teach-in mode with optical display on the detector for range indication and display of the teach-in field strength on the control panel. After interruption of the bidirectional interrogation interval of more than 300 seconds with the control panel, the detector switches to autonomous mode and ensures acoustic signalling in the event of fire in its area. Sensor head replacement every 8 years. After the sensor head has been replaced, no settings need to be made on the control panel, which automatically recognises the type of the new sensor head. If the previous sensor head is different, this must be confirmed at the control panel.
BEKA radio push-button detector insert, house alarm. Pressure alarm button insert for regular replacement of the BEKA radio pressure alarm button RFM200D after approx. 5 years, insert with pressure alarm and evaluation unit, radio module and battery, detector must be re-taught into the radio control centre after replacement.
BEKA detector base with siren, without sensor head. Replacement base for RFM10xD with detection evaluation and radio module, detector must be taught into the radio control centre again.
€140.67*
This website uses cookies to ensure the best experience possible. More information...
