Stromzähler 1-phasig für Huawei. Genauigkeitsklasse 1 für DIN-Schienenmontage mit LCD Display. Inklusive Stromzange und 5 m RS485 Kabel, anschlussfertig.
With the novotegra facade mounting system, you do not use the roof, but rather the outer wall of a building to produce electricity: the photovoltaic system is hung vertically in front of the facade - separated from the building and well ventilated. Our facade mounting system is installed on solid building exterior walls, for example made of brick, stone or concrete - and only on cold facades, i.e. on walls without external thermal insulation. Regardless of whether it is on the outside wall of an industrial building or a single-family home: our photovoltaic mounting system creates modern, very aesthetic facades that visually enhance the building. All visible mounting system parts are available in blank aluminum and black anodized and can be combined with blue to almost completely black modules - depending on the desired design. The facade mounting system uses the same durable and corrosion-resistant components as the novotegra on-roof systems and works with our proven insertion technology.
Mit EMMA, dem neuen Energy Management Assistance System von Huawei, bekommt ihr PV-System eine Frischzellenkur für das Lade- und Lastmanagement. Neben der Vernetzung mit mehreren Wechselrichtern, Wallboxen, Wärmepumpen und weiterem Zubehör ist zukünftig auch die Einbindung von Börsenstrompreisen und Sondertarifen geplant. EMMA öffnet die Tür zum Energiemanagement 3.0. Selbstverständlich erfolgt die Visualisierung im Huawei FusionSolar Portal samt App.
Produktvorteile:
Die smarte Ergänzung für Ihr Huawei Heimspeichersystem
Überwachung in der Huawei App
Neue Schnittstellen für externes Lade- und Lastmanagement
Produkteigenschaften:
AC-Anschluss: 230V / 50Hz
Spannungsbereich: 10 bis 80 V
Kommunikation: WLAN, LAN, RS485
Schutzklasse: IP 2X
Komponenten: bis zu 3 WR, bis zu 2 Smart Charger, bis zu 2 Wärmepumpen
Kompatible WR: Huawei SUN2000 2-6KTL-L1, 8-10K-LC0, 3-10KTL-M1, 12-25KTL-M5, 12-25K-MB0
Kompatibles Zubehör: Huawei Smart Charger, Wärmepumpen mit SG-Ready Schnittstelle, Shelly Device
One optimizer for all application scenarios, Up to 30% more energy by optimizing the performance of each module, Lower BoS costs and greater oversizing with long string design, Module-level voltage shutdown for safe installation and maintenance, Supports arc fault localization.< /p>
Rated input power 600W
max. Input voltage 80V
MPPT voltage range 10 - 80V
max. Input current (ISC) 14.5A
max. Output voltage 80V
max. Output current 15A
Compatible with:
SUN2000-2/3/3.68/4/4.6/5/6KTL-L1
SUN2000-3/4/5/6/8/10KTL-M1
SUN2000-12/15/17/20KTL-M2
SUN2000-30/36/40KTL-M3
PLEXLOG Datenlogger:
PLEXLOG PL 40 Home (2 Jahre Garantie)
The most important features of the PLEXLOG data logger:
Compatibility guaranteed with all common inverter manufacturers
Perfectly coordinated monitoring system together with the PLEXLOG portal
Remote maintenance capable with the PLEXLOG remote configuration tool
PLEXLOG Cloud makes everyday life easier and improves data consistency
Feed-in management including interface for remote-controlled power reduction, reactive power control, etc.
Smart Energy for controlling heat pumps or a variety of other components
Numerous (sensor) interfaces for connecting meters and sensors for example for consumption analysis and optimization (S0, RS485/RS422, ETH)
Quick and easy commissioning without an additional PC via 7″ touch display
The PLEXLOG PL40 data logger
For small to medium-sized systems, the PL40 offers a wide range of functions and a variety of interfaces. It already has two digital connections (RS485/422/ETH) to specifically control devices such as switching relay controls for heat pumps, heating cartridges or other SmartEnergy components. Accessories such as digital consumption meters, irradiation sensors, weather stations or large displays can also be implemented and analyzed via the PLEXLOG portal. The basic configuration includes three S0/IN interfaces that can be operated in consumption meter or inverter mode. Remote configuration and current EEG regulations are fully supported by the PL40.
The PLEXLOG PL100 data logger
The PL100 is the right choice for systems up to 100 kWp - even in mixed inverter operation (for up to two manufacturers). Functions such as creating different asset groups with specific compensation and forecasts are no problem. A PM interface for power reduction by the network operator via a remote ripple control receiver is integrated as standard. Like all PL data loggers, the PL100 has a remote maintenance interface so that the configuration can be adjusted later and without high costs. The perfect device for monitoring and integrating medium to large systems.
The PLEXLOG PL500+ data logger
The solution for systems in the professional sector. The PL500+ supports up to three different inverter manufacturers in parallel and is not subject to any performance limits. Since it offers full support for central inverters and string boxes, it is also very popular in the solar park sector and can monitor and control up to 150 devices without any problems. Of course, it also offers a direct marketing interface for current EEG regulations and to generate optimal returns. In order to implement the network operators' special requirements for active and reactive power control, the PL500+ offers support for I/0 boxes, which adapt all values individually to the utility company.
Other functions of the PLEXLOG PL data logger
USB interface Ethernet interface
7″ touch display
remote maintenance capable
supports all common inverter manufacturers such as: SolaX Power, Power-One, SMA, Kaco, Kostal, Fronius, Solarmax, Pairan, ABB, Siemens, Refusol, Schüco and many more.
MPPT monitoring fault message management
Yield forecasts
System groups and module fields
encrypted connection to the server
HQ RS485/422 Controller – for extended voltage range and stable communication
Limiting the system output (e.g. 70%) including charging for own consumption
The Cloud Connect Advanced (CCA) is a compact and powerful data logger and the communication center of the Tigo TS4 platform. It takes over the data monitoring and security functions of the Tigo Smart Modules.
Transmits production data from up to 900 TS4 Smart modules
Supports wired and wireless Internet networks Control of data monitoring and security functions
Configuration and picking with the Tigo SMART app
Data monitoring of third-party accessories via Modbus
Kit consisting of CLOUD CONNECT ADVANCED (CCA), TIGO ACCESS POINT (TAP) and DIN rail power supply (MW DR-15-24)
Multi-pole surge arrester DEHNcube YPV SCI 1000 1M with protection class IP65. Type 2 according to EN 50539-11 to protect 1 MPP input. Three-stage DC switching device with combined disconnection and short-circuiting device with safe electrical isolation. To protect low-voltage consumer systems from surges. For use in accordance with DIN IEC 60364-7-712:2011-04 (installation of photovoltaic supply systems).
Module power optimizer for SE inverters
Specially developed for use with SolarEdge inverters for rooftop systems
Outstanding efficiency (99.5%)
Reduces all types of losses due to module mismatch, from manufacturing tolerance to partial shading
Faster installation with simplified cable management and simple assembly with just one screw
Detects abnormalities on the PV connector and thus prevents possible safety risks (functionality depends on inverter model and firmware version)
Advanced safety for installers, maintenance personnel and emergency responders through voltage reduction at the module level, compliant with the requirements of VDE AR 2100-712 and OVE R11-1
Flexible system design for maximum use of space
Compatible with bifacial PV modules
Output connector: MC4 pluggable
Output cable length: 2.3 m (+), 0.1 m (-)
Input cable length: 0.1 m
Power optimizer for operation with SolarEdge inverters and a high-performance module
Specially developed for use with SolarEdge inverters
Increase yield through MPP tracking at module level and elimination of mismatch losses
Flexible system design for maximum use of space
Up to 25% more energy yield
Modern and fast maintenance thanks to monitoring at module level
Quick installation with a single screw
Very high efficiency (99.5%)
Output connector: MC4 pluggable
Output cable length: 1.4 m
Input cable length: 0.16 m
Storage temperature range: -40°C to +70°C (-40°F to +158°F)
Protection class: IP68
Output cable length: 1.2 m
Connector: MC4/MC4 EVO2
Maximum system voltage: 1000 V
Voltage range: 16-80V
Maximum input current (IMAX): 15A
Communication type: radio connection
Cloud Connect with TAP from Tigo is required for monitoring. Item number: KS-0131542.
The three-phase enwitec SMA SI switching device is capable of both phase coupling and all-pole isolation. It is compatible with the SMA Sunny Island inverters and the SMA Energy Manager EM-20 and SHM 2.0 can also be integrated.
Application:
Replacement power — SMA Flexible Storage System
Battery inverter:
Sunny Island 4.4M-12 from firmware version 1.00.xx.R
Sunny Island 6.0H-12 from firmware version 1.00.xx.R
Sunny Island 8.0H-12 from firmware version 1.00.xx.R
Net shape:
TT or TN-S system Sunny Island feed: 1 phase! (=1 x Sunny Island)
PV performance optimization at module level
Specially developed for use with SolarEdge inverters for rooftop systems
Outstanding efficiency (99.5%)
Reduces all types of losses due to module mismatch, from manufacturing tolerance to partial shading
Faster installation with simplified cable management and simple assembly with just one screw
Detects abnormalities on the PV connector and thus prevents possible safety risks (functionality depends on inverter model and firmware version)
Advanced safety for installers, maintenance personnel and emergency responders through voltage reduction at the module level, compliant with the requirements of VDE AR 2100-712 and OVE R11-1
Flexible system design for maximum use of space
Compatible with bifacial PV modules
Output connector: MC4 pluggable
Output cable length: 2.3 m (+), 0.1 m (-)
Input cable length: 0.1 m
Power optimizer for operation with SolarEdge inverters (SE16k and larger) and 2 bifacial or high-performance modules in series connection)
Output connector: MC4 pluggable
Output cable length: 2.2 m
Input cable length: 1.3 m
Storage temperature range: -40°C to +85°C (-40°F to +185°F)
Protection rating: IP68
Maximum altitude: 2000m
Voltage range (per input): 16-90V
Maximum current (per input): 15A
Maximum power: 500W
Output cable length: 1.2 m
Connector: MC4
Communication type: radio connection
Cloud Connect with TAP from Tigo is required for monitoring. Our item number: KS-0131542.
Power optimizer for operation with SolarEdge inverters (SE16k and larger) and 2 bifacial or high-performance modules in series connection)
Output connector: MC4 pluggable
Output cable length: 2.2 m
Input cable length: 0.16 m
Power optimizer for operation with SolarEdge inverters (SE16k and larger) and 2 bifacial or high-performance modules in series connection)
Output connector: MC4 pluggable
Output cable length: 2.2 m
Input cable length: 0.16 m
Housing TYPE 2 DC +/- 2 MPPT (clamp) generator connection box for photovoltaic systems up to 1000 V DC for connecting 2 x 1 string. With surge protection and push-in connection for the input and output sides.
Generator connection box for photovoltaic systems up to 1000 V DC for connecting 1x 1 string. With surge protection and SUNCLIX DC connectors for the input and output sides.
Generator connection box for photovoltaic systems up to 1000 V DC for connecting 1x 2 strings. With surge protection and push-in connection for the input and output sides.
Housing TYPE 2 DC +/- 1 MPPT (clamp) generator connection box for photovoltaic systems up to 1000 V DC for connecting 1 x 1 string. With surge protection and push-in connection for the input and output sides.
€160.64*
This website uses cookies to ensure the best experience possible. More information...