This 1.5" heating element with 3 kW is continuously controlled via the SMARTFOX energy manager and a suitable thyristor controller. The surplus energy that can be used for this is recorded, regardless of the manufacturer, with current measuring transformers at the grid connection point.
Product features:
Heating output 3 kW
1-phase connection
required connection flange: 1 1/2"
Length: L = 510 mm
Width: B = 80 mm
Height: H = 80 mm
Weight: 1.68 kg
immersion depth ET: 370 mm
The intelligent technology of SMARTFOX PRO automatically controls consumers within your home with your excess solar energy and thus improves the self-consumption rate of your photovoltaic system. SMARTFOX PRO means connectivity without restrictions. A variety of connection options bring the greatest possible efficiency to your system. An essential element in maximizing self-consumption is the use of devices such as boilers, heat pumps, electric vehicles, infrared heaters and storage systems. If solar energy is not used directly, these consumers offer ideal energy storage in the form of water or electricity. SMARTFOX can be integrated into new as well as all existing systems. The new WLAN interface guarantees the easiest and fastest possible commissioning, including intelligent monitoring with unique resolution.
The intelligent technology of SMARTFOX PRO automatically controls consumers within your home with excess energy and thus improves the self-consumption rate of your photovoltaic system to a maximum. SMARTFOX PRO means connectivity without restrictions. A variety of connection options bring the greatest possible efficiency to your system. An essential element in maximizing self-consumption is the use of devices such as boilers, heat pumps, electric vehicles, infrared heaters and storage systems. If solar energy is not used directly, these consumers offer ideal energy storage in the form of water or electricity. SMARTFOX can be integrated into new as well as all existing systems. The WLAN interface guarantees the easiest and fastest possible commissioning, including intelligent monitoring with unique resolution.
Available with a power of 3kW / 4.5KW / 6kW or 9kW. 6/4 inch threaded heating rod including thermostat switch (0°C to 85°C) and safety thermostat (110°C) with an immersion depth of 345mm, 360mm, 480mm or 660mm (100mm unheated).
Available with a power of 3kW / 4.5KW / 6kW or 9kW. 6/4 inch threaded heating rod including thermostat switch (0°C to 85°C) and safety thermostat (110°C) with an immersion depth of 345mm, 360mm, 480mm or 660mm (100mm unheated).
Available with a power of 3kW / 4.5KW / 6kW or 9kW. 6/4 inch threaded heating rod including thermostat switch (0°C to 85°C) and safety thermostat (110°C) with an immersion depth of 345mm, 360mm, 480mm or 660mm (100mm unheated).
For the AC series devices, the USB interface is used to set the device parameters and update the device firmware. To do this, it establishes the connection between a Windows computer and the IR interface on the AC ELWA. For operation, a license-free "Virtual Com Port Driver" from FTDI® must be installed on the PC.
The my-PV Wifi Meter analyzes the power flows of the PV system. Using WIFI, it transmits the information about excess services to the router. This means that only the energy that is currently available is used to generate heat. There is therefore no feed into the power grid: PV self-consumption is maximized and the public low-voltage grid is relieved. The my-PV Wifi meter is installed directly after the energy supplier's meter in the distribution cabinet and measures the load flow via three external folding current transformers.
The AC ELWA 2 is a 0 - 3.5 kW continuously controlled hot water heating device for grid-connected photovoltaic systems and is the successor to the proven AC ELWA-E. The electric heating element AC ELWA-2 is intended for combination with a photovoltaic system. The heating element should be operated with "surplus" solar power in order to increase self-consumption and the self-sufficiency rate
More power: 3.5 kW
Easiest installation: The heating element and the control unit can be attached one after the other
Easy to use thanks to the display like the AC THOR
Multiple communication options: in addition to Ethernet RJ45 also WLAN, RS485, PWM-in, potential-free switching output
System open for various inverters, battery systems and smart homes
An external 3 kW heating element can be connected
Can be installed in hot water and buffer tanks
Stepless control for optimal energy use
Optional hot water backup
Use also in residential construction
No thyristor controller, TAB/TAEV compliant
The my-PV AC THOR 9s is a photovoltaic power manager for hot water and heating and continuously regulates up to 9kW up to three heat sources depending on the PV energy supply and heat requirement. It communicates via network with inverters, battery systems and smart home controls and receives information about how much photovoltaic energy is available. Any missing energy is obtained from the public power grid, starting the heating system is no longer necessary.
Easy & Efficient: The my-PV AC THOR 9s controls up to 3 electrical heat sources depending on the availability of PV energy and heat requirements - both for hot water and for space heating. It ensures your personal living comfort fully automatically. In residential buildings that have been built or renovated to today's thermal standards, the my-PV AC THOR 9s replaces conventional, water-based building technology. Any remaining energy that is missing can be obtained from the public power grid.
Of course, the my-PV AC THOR 9s can also be integrated into conventional, water-based systems, such as buffer storage. Its flexibility leaves nothing to be desired. Thanks to the built-in touch display, it can be operated at any time without additional devices and is very easy to install.
Continuously variable up to 9 kW possible
3 adjustable outputs
For 3-phase heating elements with a common neutral conductor
Easiest loading of three zones 3 x 3 kW
Can also be combined with a heat pump
Two-zone room heating possible
Reduction of the building services room
System open for various inverters, battery systems and smart homes
Up to 85% PV self-consumption even without battery storage
SMARTFOX Meter is the easiest way to implement holistic building monitoring. Its 5 S0 meters make it possible to measure your total hot water, electricity and heating oil consumption. It can be easily integrated into any existing system, regardless of whether a SMARTFOX self-consumption controller is installed or not. This simple extension allows you to monitor and visualize your operating costs and needs. SMARTFOX Meter can also be used to measure the energy production of your photovoltaic system. You can access the data at my.smartfox.at.
ELWA is a 2 kW photovoltaic hot water heating device and is perfect if you want to use your solar power exclusively to produce hot water. The direct current from photovoltaic modules is transferred directly to the built-in heating element and immediately converted into heat without loss. The built-in MPP tracker ensures that the PV generator is always operated at the optimal operating point, similar to a PV inverter.
No connection to the power grid is required to operate the ELWA, as the device is powered by the PV generator, i.e. pure island operation. The desired hot water temperature is set using a rotary knob and the LED displays provide information about the current device status.
Easier and cheaper than thermal solar systems
No need to go to the authorities: You save yourself the hassle of having to go to the authorities because our ELWA does not feed any electricity into the grid.
Easiest installation thanks to "cables instead of pipes", contains less valuable copper, practically no maintenance costs.
Shift charging possible with 2 devices
Also works in the event of a power failure
Hot water backup can be used optionally
No frost protection necessary
Cables have almost no energy losses compared to pipes
The intelligent technology of SMARTFOX PRO automatically controls consumers within your home
Your excess solar energy and thus improves the self-consumption rate of your photovoltaic system.
SMARTFOX PRO means connectivity without restrictions. Brings a variety of connection options
maximum efficiency in your system. An essential element in maximizing self-consumption is the use of devices such as boilers, heat pumps, electric vehicles, infrared heaters and storage systems. If the
Solar energy is not used directly, these consumers offer an ideal energy storage in the form of water
or just electricity. SMARTFOX can be integrated into new as well as all existing systems. The new
WLAN interface guarantees the easiest and fastest possible commissioning, including intelligent monitoring
unique resolution.
The screw-in heaters were developed particularly for use with the photovoltaic power manager AC THOR (3 kW) and AC THOR 9s (9 kW) and can be installed in fresh water and buffer storage. The special design results in only very low thermal surface loads on the heating elements, which directly contributes to increasing the product's service life.
A safety temperature limiter is integrated. The desired hot water temperature can be set using a rotary knob.
In some projects, however, higher temperatures are desired, for example if a buffer storage needs to be charged to over 90°C. The screw-in radiators are also available without a thermostat, only with a safety temperature limiter. To end the heating process, you must always use the temperature sensor that is included with the AC THOR and the AC THOR 9s.
With manually adjustable target temperature (bimetal thermostat)
1.5 inch standard thread
Single-phase or 3-phase
Optionally also without thermostat, only with safety temperature limiter
Available with a power of 3kW / 4.5KW / 6kW or 9kW. 6/4 inch threaded heating rod including thermostat switch (0°C to 85°C) and safety thermostat (110°C) with an immersion depth of 345mm, 360mm, 480mm or 660mm (100mm unheated).
The SMARTFOX Pro Heater 3 / 4.5 / 6 / 9K is the ideal addition to your SMARTFOX energy manager and stores PV surplus as hot water in 15 dynamic levels. The “Heater” can be used to heat heating and drinking water in enamelled buffer tanks and containers. Using an integrated temperature sensor, sufficient hot water can be ensured even in bad weather and a hygiene function (Legionella) can be carried out. The included performance measurement enables high-resolution monitoring via web portal & APP. With the remote control you always have your hot water under control, even when you're on the move.
SMARTFOX PRO Light 2 is the perfect solution for customers who need a compact energy management system for hot water preparation. In addition to the analog output, SF PRO Light 2 has a PT1000 interface, a relay, an RS485 interface and an SD memory card. A real-time clock is implemented in the software, with which a forced release for the heating element can be programmed, thus ensuring hot water preparation even in bad weather. With the PT1000 interface, a minimum temperature that should be maintained and a maximum temperature that should only be achieved with excess energy can be set
The my-PV AC THOR is a photovoltaic power manager for hot water and heating and continuously regulates electrical heat sources depending on the PV energy supply and heat requirement. It communicates via network with inverters, battery systems and smart home controls and receives information about how much photovoltaic energy is available. Any missing energy is obtained from the public power grid, starting the heating system is no longer necessary.
Easy & Efficient: The my-PV AC THOR controls electrical heat sources depending on the availability of PV energy and heat requirements - both for hot water and for space heating. It ensures your personal living comfort fully automatically. In a residential building that has been built or renovated according to today's thermal technology standards, the AC•THOR replaces conventional, water-based building technology. Any remaining energy that is missing can be obtained from the public power grid.
Of course, the my-PV AC THOR can also be integrated into conventional, water-based systems, such as buffer storage. Its flexibility leaves nothing to be desired. Thanks to the built-in touch display, it can be operated at any time without additional devices and is very easy to install.
30% cost savings compared to conventional systems thanks to self-generated energy
Maintenance-free thanks to cables instead of pipes
Reduction of the building services room
System open for various inverters, battery systems and smart homes
Enables affordable living even in residential construction
Up to 85% PV self-consumption even without battery storage
The SMARTFOX Energy Meter is a 3-phase meter with an LCD display for displaying and monitoring power consumption. In order to create holistic building monitoring, the meter can be connected to SMARTFOX Pro or SMARTFOX Meter devices via RS485 (Modbus RTU) or S0 interface. This means that generating systems (PV inverters, hydroelectric power plants...) as well as consumers (heat pumps, charging stations, apartments...) can be included in the monitoring.
The intelligent technology of SMARTFOX PRO automatically controls consumers within your home
Your excess solar energy and thus improves the self-consumption rate of your photovoltaic system.
SMARTFOX PRO means connectivity without restrictions. Brings a variety of connection options
maximum efficiency in your system. An essential element in maximizing self-consumption is the use of devices such as boilers, heat pumps, electric vehicles, infrared heaters and storage systems. If the
Solar energy is not used directly, these consumers offer an ideal energy storage in the form of water
or just electricity. SMARTFOX can be integrated into new as well as all existing systems. The new
WLAN interface guarantees the easiest and fastest possible commissioning, including intelligent monitoring
unique resolution
The screw-in heaters were developed particularly for use with the photovoltaic power manager AC THOR (3 kW) and AC THOR 9s (9 kW) and can be installed in fresh water and buffer storage. The special design results in only very low thermal surface loads on the heating elements, which directly contributes to increasing the product's service life.
A safety temperature limiter is integrated. The desired hot water temperature can be set using a rotary knob.
In some projects, however, higher temperatures are desired, for example if a buffer storage needs to be charged to over 90°C. The screw-in radiators are also available without a thermostat, only with a safety temperature limiter. To end the heating process, you must always use the temperature sensor that is included with the AC THOR and the AC THOR 9s.
With manually adjustable target temperature (bimetal thermostat)
1.5 inch standard thread
Single-phase or 3-phase
Optionally also without thermostat, only with safety temperature limiter
The 80A/100A current transformers record the current flow at the house connection point and thus form the
Measurement basis of the SMARTFOX energy management system. There are maximum currents of 80A or 100A
measurable. With the integrated RJ-12 plug, the current transformers can be connected directly to all SMARTFOX
Energy manager can be connected.
€145.88*
This website uses cookies to ensure the best experience possible. More information...